manualshive.com logo in svg

IEI Technology WSB-9152, User Manual, Page: 50 / 258

Share
Download
IEI Technology WSB-9152 User Manual Download Page 50

 

 

WSB-9152 PICMG 1.0 SBC

Page 30 

The parallel port controller is connected to an external DB-26 LPT connector. 

2.7.2.6 Super I/O Keyboard and Mouse Controller 

The Super I/O keyboard and mouse controller is compatible with the following 

specifications. 

ƒ

 8042 

compatible 

ƒ

 

Asynchronous access to two data registers and one status register 

ƒ

 

Compatible with 8042 software 

ƒ

 PS/2 

mouse 

supported 

ƒ

 

Port 92 supported 

ƒ

 

Interrupt and polling modes supported 

ƒ

 

Fast Gate A20 and Hardware Keyboard Reset 

ƒ

 8-bit 

timer/counter 

The keyboard and mouse controller is interfaced to a keyboard and mouse connected to 

the backplane through the board-to-board connectors. 

2.8 Environmental and Power Specifications 

2.8.1 System Monitoring 

Three thermal inputs on the WSB-9152 Super I/O Enhanced Hardware Monitor monitor 

the following temperatures: 

ƒ

 System 

temperature 

ƒ

 Power 

temperature 

ƒ

 CPU 

temperature 

Ten voltage inputs on the WSB-9152 Super I/O Enhanced Hardware Monitor monitor the 

following voltages: 

ƒ

 +1.5 

V 

ƒ

 +1.8 

V 

ƒ

 +3.3 

V 

ƒ

 +5.0 

V 

ƒ

 +12.0 

V 

Summary of Contents for WSB-9152



































































































































































































































































Reviews:

No comments