manualshive.com logo in svg

IEI Technology WSB-9152, User Manual, Page: 45 / 258

Share
Download
IEI Technology WSB-9152 User Manual Download Page 45

 

 

WSB-9152 PICMG 1.0 SBC 

Page 25

2.6.7 JMicron JMB363 SATA II Controller 

One PCIe lane is connected to the JMicron JMB363 dual port SATA controller shown in. 

 

Figure 2-15: SATA II Ports 

The JMB363 provides two SATA II ports that can support up two 3.0 Gb/s SATA II drives. 

The JMB363 also provides the ability to create a RAID 0, RAID 1 or JBOD array. Native 

Command Queuing (NCQ) and Hot Plugging are also supported. SATA controller 

specifications are listed below. 

ƒ

 

Supports two SATA II drives 

ƒ

 

Supports 3.0 Gb/s data transfer speeds 

ƒ

 

Supports Serial ATA Specification, Revision 1.0a 

ƒ

 

Supports Serial ATA II extensions to Serial ATA 1.0a, Revision 1.1 

ƒ

 

Supports RAID 0, RAID 1 and JBOD 

2.6.8 Intel

®

 ICH6M USB Controller 

Up to seven high-speed, full-speed or low-speed USB devices are supported by the 

ICH6M on the WSB-9152. High-speed USB 2.0, with data transfers of up to 480 MB/s, is 

enabled with the ICH6M integrated Enhanced Host Controller Interface (EHCI) compliant 

host controller. USB full-speed and low-speed signaling is supported by the ICH6M 

integrated Universal Host Controller Interface (UHCI) controllers. 

Summary of Contents for WSB-9152



































































































































































































































































Reviews:

No comments