manualshive.com logo in svg

IEI Technology WSB-9152, User Manual, Page: 109 / 258

Share
Download
IEI Technology WSB-9152 User Manual Download Page 109

 

 

WSB-9152 PICMG 1.0 SBC 

Page 89

5.6.3 5.1 Channel Audio Kit Installation 

 NOTE: 

This is an optional item that must be ordered separately. For further 

information please contact the nearest WSB-9152 distributor, reseller 

or vendor or contact an iEi sales representative directly. Send any 

queries to 

[email protected]

.  

The optional 5.1 channel audio kit connects to the 10-pin audio connector on the 

WSB-9152. The audio kit consists of three audio jacks. One audio jack, Mic In, connects 

to a microphone. The remaining two audio jacks, Line-In and Line-Out, connect to two 

speakers. To install the audio kit, please refer to the steps below: 

Step 1: 

Connect the audio kit cable. 

The audio kit is shipped with a cable that 

connects the audio kit to the WSB-9152. Connect the cable to the connector on 

the back of the audio kit. Make sure the pins are properly aligned (i.e. pin 1 

connects to pin 1).

 

Step 2: 

Locate the audio connector

. The location of the 10-pin audio connector is 

shown in 

Chapter 3

.

 

Step 3: 

Align pin 1

. Align pin 1 on the onboard connector with pin 1 on the audio kit 

cable connector. Pin 1 on the audio kit cable connector is indicated with a white 

dot. See 

Figure 5-13

. 

Summary of Contents for WSB-9152



































































































































































































































































Reviews:

No comments