IEI Technology WSB-9152 User Manual Download Page 106

Page: 106 / 258

WSB-9152 PICMG 1.0 SBC

Page 86

5.5 Chassis Installation

5.5.1 Airflow

WARNING:

Airflow is critical to the cooling of the CPU and other onboard

components. The chassis in which the WSB-9152 is installed must

have air vents to allow cool air to move into the system and hot air to

move out.

The WSB-9152 must be installed in a chassis with ventilation holes on the sides allowing

airflow to travel through the heat sink surface. In a system with an individual power supply

unit, the cooling fan of a power supply can also help generate airflow through the board

surface.

NOTE:

IEI has a wide range of backplanes available. Please contact your

WSB-9152 vendor, reseller or an IEI sales representative at

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

5.5.2 Backplane Installation

Before the WSB-9152 can be installed into the chassis, a backplane must first be installed.

Please refer to the installation instructions that came with the backplane and the chassis

to see how to install the backplane into the chassis.

Summary of Contents for WSB-9152



































































































































































































































































Search results

Summary of Contents for WSB-9152

Reviews:

IEI Technology WSB-9152, User Manual, Page: 106 / 258

Search results

Summary of Contents for WSB-9152

Reviews: