IEI Technology WSB-9152 User Manual Download Page 146

Page: 146 / 258

WSB-9152 PICMG 1.0 SBC

Page 126

8 USB Ports

EFAULT

8 USB ports enabled

USB 2.0 Controller [Enabled]

Use the

USB 2.0 Controller

BIOS option to enable or disable the USB 2.0 controller

Disabled

USB 2.0 controller disabled

Enabled D

EFAULT

USB 2.0 controller enabled

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

USB2.0 Controller Mode [HiSpeed]

Use the

USB2.0 Controller Mode

option to set the speed of the USB2.0 controller.

FullSpeed

The controller is capable of operating at 12 Mb/s

HiSpeed D

EFAULT

The controller is capable of operating at 480 Mb/s

Summary of Contents for WSB-9152



































































































































































































































































Search results

Summary of Contents for WSB-9152

Reviews:

IEI Technology WSB-9152, User Manual, Page: 146 / 258

Search results

Summary of Contents for WSB-9152

Reviews: