IEI Technology WSB-9152 User Manual Download Page 110

Page: 110 / 258

WSB-9152 PICMG 1.0 SBC

Page 90

Figure 5-13: 5.1 Channel Audio Kit

Step 4:

Mount the audio kit onto the chassis

. Once the audio kit is connected to the

WSB-9152, secure the audio kit bracket to the system chassis.

Step 5:

Connect the audio devices

. Connect one speaker to the line-in audio jack, one

speaker to the line-out audio jack and a microphone to the mic-in audio jack.

Step 6:

Install the driver

. If the 5.1 channel audio kit is used, the ALC665 driver must

be installed. Refer to

Chapter 7

for driver installation instructions.

Step 0:

5.6.4 7.1 Channel Audio Kit Installation

NOTE:

This is an optional item that must be ordered separately. For further

information please contact the nearest WSB-9152 distributor, reseller

or vendor or contact an iEi sales representative directly. Send any

queries to

[email protected]

The optional 7.1 channel audio kit connects to the 10-pin audio connector on the

WSB-9152. The audio kit consists of five audio jacks. One audio jack, Mic In, connects to

Summary of Contents for WSB-9152



































































































































































































































































Search results

Summary of Contents for WSB-9152

Reviews:

IEI Technology WSB-9152, User Manual, Page: 110 / 258

Search results

Summary of Contents for WSB-9152

Reviews: