IEI Technology WSB-9152 User Manual Download Page 171

Page: 171 / 258

WSB-9152 PICMG 1.0 SBC

Page 151

7.1 Introduction

The JMicron JMB363 SATA RAID chipset can control parallel ATA (PATA) and SATA

disks. The JMicron controller supports PATA UDMA transfer modes up to mode 6 and

SATA II disk drives. The JMicron JMB363’s RAID functionality can increase the data

read/write speed (RAID 0) or provide data protection by mirroring drive data (RAID 1).

CAUTION!

A configured RAID volume (which may consist of multiple hard drives)

appears to an operating system as a contingent storage space. The

operating system will not be able to distinguish the physical disk drives

contained in a RAID configuration.

7.1.1 Precautions

One key benefit a RAID 1 configuration brings is that a single hard drive can fail within a

RAID array without damaging data. With a RAID 1 array, a failed drive can be replaced

and the RAID configuration restored. Total data loss occurs when one drive fails in a RAID

0 array.

WARNING!

Irrecoverable data loss occurs if a working drive is removed when

trying to remove a failed drive. It is strongly recommended to mark the

physical connections of all SATA disk drives. Drive locations can be

identified by attaching stickers to the drive bays. If a drive member of a

RAID array should fail, the failed drive can then be correctly identified.

Summary of Contents for WSB-9152



































































































































































































































































Search results

Summary of Contents for WSB-9152

Reviews:

IEI Technology WSB-9152, User Manual, Page: 171 / 258

Search results

Summary of Contents for WSB-9152

Reviews: