29
Boot Up Num-Lock
If the user wants the Num-Lock function to be turned on during the boot-up
period so that the user can use the key pad on the keyboard right after the
system starts, please select ON to do so. Otherwise, select OFF.
Floppy Drive Swap
This setting decides whether drives A: and B: can be swapped or not. The
options are Enabled or Disabled.
Floppy Drive Seek
This setting is whether to enable floppy drives A: to perform a Seek
operation at system boot process. The options are Enabled or Disabled.
PS/2 Mouse Support
When this setting is enabled, BIOS support a PS/2- type mouse.
System Keyboard
This won’t be specified if a keyboard is attached to the computer. Otherwise,
when there’s no keyboard detected and an error message is displayed, this
setting can be marked as needed. This setting permits you to configure
workstation with no keyboard. The options are Absent, Present.
Primary Display
This setting is to configure the type of monitor attached to the computer. The
settings are Monochrome, Color 40x25,Color 80x25,VGA/PGA/EGA ,or Not
Install.
Password Check
This option enables the password check option every time the system boots
or the end user runs Setup. If always is chosen a user password prompt
appears every time the computer is tuned on. If setup is chosen, the
password prompt appears if BIOS is executed.
Boot To OS/2
Set this option to YES if running OS/2 operating system and using more than
64MB of system memory on the motherboard. The options are YES or NO.
Wait For 'F1' If Error
If this setting is enabled, AMIBIOS waits for the end user to press <F1>
before continuing. If this option is disabled, AMIBIOS continues the boot
process without waiting for <F1> to be pressed. The options are Disabled or
Enabled.
Hit 'DEL' Message Display
Disabling this setting prevents "Hit <DEL> if you want to run Setup" from
appearing when the system boots. The options are Disabled or Enabled.