33
4.9 Power Management Setup
ACPI Aware O/S
This feature is the switch of ACPI function. Configuration options : [No]
[Yes]
ACPI Standby State
This feature is the switch of STR (S3) or POS (S1) function. Configuration
options: [S3/STR] [S1/POS]
Re-Call VGA BIOS at S3 Resuming
Enable or Disable system load the VGA bios after S3 state.
Power Management/APM
When Disabled, SMI will not be initialized, and the complete power
management functionality is removed unless this option is set to Enabled.
Video Power Down Mode
Hard Disk Power Down Mode
Standby Time Out (Minute)
Suspend Time Out (Minute)
If no activity occurs during this time period, the BIOS will place the system
into the suspended low power state.
Throttle Slow Clock Ratio
Display Activity
IRQ3 ,4 ,5 ,7 , 9, 10, 11, 13, 14, 15
The factory defaults assigned IRQ3, 4, 7, and 14 to the Monitor. When other
external devices using the same IRQ numbers as of the Monitor start, the
Monitor will be waked up from the power saving state by these devices.
The user can assign the other IRQ numbers available here to the Monitor.
Just highlight the IRQ number and set the value to Monitor.
