IEI Technology POC-17C-ULT3 User Manual Download

Page: 67 / 163

POC-17C-ULT3 Medical Panel PC

Page 52

4.3.1 Trusted Computing

Use the

Trusted Computing

menu (

BIOS Menu 3

) to configure settings related to the

Trusted Computing Group (TCG) Trusted Platform Module (TPM).

Advanced

Configuration

Security Device Support

[Enable]

NO Security Device Found

Enables or Disables BIOS
support for security
device. O.S. will not
show Security Device.
TCG EFI protocol and
INT1A interface will not
be available.

----------------------

ÆÅ

: Select Screen

↑

↓

: Select Item

Enter: Select
+/-: Change Opt.
F1: General

Help

F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

BIOS Menu 3: Trusted Computing

Security Device Support [Enable]

Use the

Security Device Support

option to configure support for the security devices.

Disable

Security device support is disabled.

Enable D

EFAULT

Security device support is enabled.

Summary of Contents for POC-17C-ULT3




































































































































































Search results

Summary of Contents for POC-17C-ULT3

Reviews:

Related manuals for POC-17C-ULT3

Brands by name

Popular brands

IEI Technology POC-17C-ULT3, User Manual

Search results

Summary of Contents for POC-17C-ULT3

Reviews:

Related manuals for POC-17C-ULT3

Brands by name

Popular brands