IEI Technology POC-17C-ULT3 User Manual Download Page 79

Page: 79 / 163

POC-17C-ULT3 Medical Panel PC

Page 64

Intel VT-x Technology: Indicates if Intel VT-x Technology is supported by the

CPU.

Intel SMX Technology: Indicates if Intel SMX Technology is supported by the

CPU.

64-bit: Indicates if 64-bit OS is supported by the CPU.

EIST Technology: Indicates if EIST Technology is supported by the CPU.

L1 Data Cache: Lists the amount of data storage space on the L1 cache.

L1 Code Cache: Lists the amount of code storage space on the L1 cache.

L2 Cache: Lists the amount of storage space on the L2 cache.

L3 Cache: Lists the amount of storage space on the L3 cache.

Hyper-threading [Enabled]

Use the

Hyper-threading

option to enable or disable the Intel® Hyper-Threading

Technology.

Disabled

Disable Intel® Hyper-Threading Technology

Enabled D

EFAULT

Enable Intel® Hyper-Threading Technology

Active Processor Cores [All]

Use the

Active Processor Cores

BIOS option to enable numbers of cores in the

processor package.

All

EFAULT

Enable all cores in the processor package.

Enable one core in the processor package.

Intel Virtualization Technology [Disabled]

Use the

Intel Virtualization Technology

option to enable or disable virtualization on the

system. When combined with third party software, Intel® Virtualization technology allows

several OSs to run on the same system at the same time.

Disabled D

EFAULT

Disables Intel Virtualization Technology.

Enabled

Enables Intel Virtualization Technology.

Summary of Contents for POC-17C-ULT3




































































































































































Search results

Summary of Contents for POC-17C-ULT3

Reviews:

IEI Technology POC-17C-ULT3, User Manual, Page: 79 / 163

Search results

Summary of Contents for POC-17C-ULT3

Reviews: