IEI Technology POC-17C-ULT3 User Manual Download Page 87

Page: 87 / 163

POC-17C-ULT3 Medical Panel PC

Page 72

Enabled D

EFAULT

Enable the internal graphics device. The following

options/submenu appear with values that can be

selected:

DVMT

Pre-Allocated

DVMT

Total

Gfx

Mem

LCD

Control

DVMT Pre-Allocated [256M]

Use the

DVMT Pre-Allocated

option to set the amount of system memory allocated to the

integrated graphics processor when the system boots. The system memory allocated can

then only be used as graphics memory, and is no longer available to applications or the

operating system. Configuration options are listed below:

32M

64M

128M

256M

EFAULT

512M

DVMT Total Gfx Mem [MAX]

Use the

DVMT Total Gfx Mem

option to select DVMT5.0 total graphic memory size used

by the internal graphic device. The following options are available:

128M

256M

MAX

EFAULT

Summary of Contents for POC-17C-ULT3




































































































































































Search results

Summary of Contents for POC-17C-ULT3

Reviews:

IEI Technology POC-17C-ULT3, User Manual, Page: 87 / 163

Search results

Summary of Contents for POC-17C-ULT3

Reviews: