IEI Technology POC-17C-ULT3 User Manual Download Page 58

Page: 58 / 163

POC-17C-ULT3 Medical Panel PC

Page 43

NOTE:

When purchasing the arm please ensure that it is VESA compliant and that

the arm has a 75 mm or a 100 mm interface pad. If the mounting arm is not

VESA compliant it cannot be used to support the POC-17C-ULT3 medical

panel PC.

Step 2:

Once the mounting arm has been firmly attached to the surface, lift the panel PC

onto the interface pad of the mounting arm.

Step 3:

Align the retention screw holes on the mounting arm interface with those in the

panel PC (

Figure 3-31

Figure 3-31: VESA 75 and VESA 100 Mounting Retention Screw Holes

Step 4:

Secure the POC-17C-ULT3 to the interface pad by inserting four retention

screws through the mounting arm interface pad and into the POC-17C-ULT3.

Summary of Contents for POC-17C-ULT3




































































































































































Search results

Summary of Contents for POC-17C-ULT3

Reviews:

IEI Technology POC-17C-ULT3, User Manual, Page: 58 / 163

Search results

Summary of Contents for POC-17C-ULT3

Reviews: