IEI Technology POC-17C-ULT3, User Manual, Page: 125 / 163

POC-17C-ULT3 Medical Panel PC
Page 110
6.5 SO-DIMM Replacement
The POC-17C-ULT3 has two SO-DIMM slots, and is pre-installed with one 4 GB DDR4
SO-DIMM. To replace/install the SO-DIMM, please follow the instructions below.
Step 1:
Remove the covers. See
Section
723H
6.4
.
Step 2:
Locate the SO-DIMM slots (
724H
Figure 6-4
).
Figure 6-4: SO-DIMM Slot Locations
Step 3:
To remove the SO-DIMM, push the two handles outwards. The memory module
is ejected by a mechanism in the socket.
Step 4:
Grasp the memory module by the edges and carefully pull it out of the socket.
Step 5:
To install a new SO-DIMM, align the SO-DIMM so the notch on the memory
module lines up with the notch on the memory socket (
840H840H673H725H
Figure 6-5
).
Step 6:
Push the SO-DIMM into the socket at an angle (
841H841H674H726H
Figure 6-5
).
Step 7:
Gently push downwards and the arms clip into place (
841H841H674H727H
Figure 6-5
).
Step 0: