IEI Technology PCIE-690AM2, User Manual

Page: 117 / 234

PCIE-690AM2 PICMG 1.3 CPU Card
Page 95
One of the PS/2 cables is connected to a keyboard and the other to a mouse to the
system. Follow the steps below to connect a keyboard and mouse to the PCIE-690AM2.
Step 1: Locate the dual PS/2 connector . The location of the PS/2 connector is shown
in Chapter 3 .
Step 2: Insert the keyboard/mouse connector . Insert the PS/2 connector on the end
of the PS/2 y-cable into the external PS/2 connector. See Figure 5-17 .
Figure 5-17: PS/2 Keyboard/Mouse Connector
Step 3: Connect the keyboard and mouse . Connect the keyboard and mouse to the
appropriate connector. The keyboard and mouse connectors can be
distinguished from each other by looking at the small graphic at the top of the
connector. Step 0: