IEI Technology PCIE-690AM2 Page 36 User Manual Download

Page: 36 / 234

PCIE-690AM2 PICMG 1.3 CPU Card

Page 14

Resolution, refresh rates, and display data can be completely independent for

the two display paths

Supports both interlaced and non-interlaced displays

2.4.3.3 DVI Support

DVI support features include:

Supports a TMDS interface, enabling DVI <1650 Mbps/channel with 165 MHz

pixel clock rate per link

2.5 AMD SB600 Southbridge Chipset

2.5.1 A-Link Express II interface to the Northbridge

The AMD SB600 Southbridge is connected to the AMD 690G Northbridge chipset through

an A-Link Express II interface. Some of the A-Link Express II interface features are listed

below:

1/2/4-lane A-Link Express II interface

Dynamic detection of lane configuration

High data transfer bandwidth

Similar to PCIe x4

Figure 2-9: A-Link Express II Interface

2.5.2 PCI Host Bus Controller

The PCI interface on the AMD SB600 Southbridge is compliant with the PCI Revision 2.3

implementation. Some of the features of the PCI interface are listed below.

Summary of Contents for PCIE-690AM2











































































































































































































































Search results

Summary of Contents for PCIE-690AM2

Reviews:

Related manuals for PCIE-690AM2

Brands by name

Popular brands

IEI Technology PCIE-690AM2, User Manual

Search results

Summary of Contents for PCIE-690AM2

Reviews:

Related manuals for PCIE-690AM2

Brands by name

Popular brands