manualshive.com logo in svg

IEI Technology PCIE-690AM2, User Manual, Page: 49 / 234

Share
Download
IEI Technology PCIE-690AM2 User Manual Download Page 49

 

 

PCIE-690AM2 PICMG 1.3 CPU Card

Page 27

2.8.4.4 Super I/O Fan Speed Controller 

The Super I/O fan speed controller enables the system to monitor the speed of the fan. 

One of the pins on the fan connector is reserved for fan speed detection and interfaced to 

the fan speed controller on the Super I/O. The fan speed is then reported in the BIOS. 

2.8.4.5 Super I/O Keyboard Controller 

The Super I/O keyboard controller can execute the 8042 instruction set. Some of the 

keyboard controller features are listed below: 

 

The 8042 instruction is compatible with a PS/2 keyboard and PS/2 mouse 

 

Gate A20 and Keyboard reset output 

 

Supports multiple keyboard power on events 

 

Supports mouse double-click and/or mouse move power on events 

2.8.4.6 Super I/O Infrared 

The Super I/O has dedicated infrared pins that are interfaced to an infrared connector. 

 

Figure 2-22: Infrared 

  The infrared connector is compatible with the following standards: 

 

ASKIR 

 

SIR 

Summary of Contents for PCIE-690AM2











































































































































































































































Reviews:

No comments