IEI Technology PCIE-690AM2 Page 161 User Manual Download

Page: 161 / 234

PCIE-690AM2 PICMG 1.3 CPU Card

Page 139

6.5.3 Hard Disk Drives

Use the

Hard Disk Drives

menu to specify the boot sequence of the available HDDs.

When the menu is opened, the HDDs connected to the system are listed as shown below:

1st Drive

[HDD: PM-(part number)]

2nd Drive

[HDD: PS-(part number)]

3rd Drive

[HDD: SM-(part number)]

4th Drive

[HDD: SS-(part number)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two HDDs are connected only “

1st Drive

” and “

2nd Drive

” are listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available HDDs is shown. Select the first HDD the system boots from. If

the “

1st Drive

” is not used for booting this option may be disabled.

Summary of Contents for PCIE-690AM2











































































































































































































































Search results

Summary of Contents for PCIE-690AM2

Reviews:

Related manuals for PCIE-690AM2

Brands by name

Popular brands

IEI Technology PCIE-690AM2, User Manual

Search results

Summary of Contents for PCIE-690AM2

Reviews:

Related manuals for PCIE-690AM2

Brands by name

Popular brands