IEI Technology PCIE-690AM2 User Manual Download Page 195

Page: 195 / 234

PCIE-690AM2 PICMG 1.3 CPU Card

Page 173

Figure 7-23: RTL8110SC InstallShield Wizard

Step 17:

After the driver installation process is complete, a confirmation screen appears

(Figure 7-24).

Figure 7-24: RTL8110SC Driver Installation Complete

Step 18:

Click

INISH

to exit the program.

Step 0:

7.5 HD Audio Kit Driver Installation

To install the Realtek AC `97 audio driver, please follow the steps below.

7.5.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the Southbridge Configuration menu. Set the

Audio Controller

option to

[AC`97].

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

Summary of Contents for PCIE-690AM2











































































































































































































































Search results

Summary of Contents for PCIE-690AM2

Reviews:

IEI Technology PCIE-690AM2, User Manual, Page: 195 / 234

Search results

Summary of Contents for PCIE-690AM2

Reviews: