IEI Technology KINO-LX, User Manual, Page: 77 / 197

Page 77
KINO-LX Motherboard
WARNING!
When installing electronic components onto the KINO-LX always take
anti-static precautions in order to prevent ESD damage to the KINO-LX and
other electronic components like the CPU and DIMM modules
4.4.1 Preinstalled Components
The components listed below are preinstalled on the KINO-LX.
CPU
4.4.2 Components to Install
To install the KINO-LX, the following components must be installed or connected to the
KINO-LX:
DIMM modules
Peripheral devices
4.4.3 DIMM Module Installation
4.4.3.1 Purchasing the Memory Module
When purchasing DIMM modules, the following considerations should be taken into
account: to 1GB of 333MHz or 400MHz of DDR memory
The DIMM module can support a memory chip with a maximum size of 1GB
The DIMM module can have a of 333MHz or 400MHz
The DIMM can be either single-sided or dual-sided.
4.4.3.2 DIMM Module Installation
The KINO-LX motherboard has one DDR SDRAM DIMM socket. To install a DIMM
module, follow the instructions below and refer to Figure 4-1 .
Step 1: Pull the two white handles on either side of the DIMM socket down.