IEI Technology KINO-DH610 User Manual Download Page 83

Page: 83 / 162

KINO-DH610

Page 71

5.3.5 USB Configuration

Use the

USB Configuration

menu (

BIOS Menu 8

) to read USB configuration information

and configure the USB settings.

Advanced

USB Configuration

USB Devices:
1 Keyboard, 2 Hubs

USB Support

[Enabled]

Legacy USB Support

[Enabled]

Enables BIOS USB
support. This item does
not effect USB
functionality in OS.

---------------------



: Select Screen





: Select Item

Enter

Select

+/-: Change Opt
F1 General

Help

F2 Previous

Values

F3 Optimized

Defaults

Save & Exit

ESC Exit

BIOS Menu 8: USB Configuration



USB Devices

The

USB Devices Enabled

field lists the USB devices that are enabled on the system



USB Support [Enabled]

Use the

USB Support

option to enable or disable USB support on the system.



Disabled

USB support disabled



Enabled D

EFAULT

USB support enabled



Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

USB drivers loaded. When this option is enabled, any attached USB mouse or USB

Summary of Contents for KINO-DH610



































































































































































Search results

Summary of Contents for KINO-DH610

Reviews:

Related manuals for KINO-DH610

Brands by name

Popular brands

IEI Technology KINO-DH610, User Manual

Search results

Summary of Contents for KINO-DH610

Reviews:

Related manuals for KINO-DH610

Brands by name

Popular brands