manualshive.com logo in svg

IEI Technology KINO-DH610, User Manual

Share
Download
IEI Technology KINO-DH610 User Manual Download Page 14

 

 

KINO-DH610

Page 2 

1.1 Introduction 

 

Figure 1-1: KINO-DH610 

The KINO-DH610 is a Mini-ITX motherboard. It accepts a LGA1155 Intel® Core™ i3/ 

Pentium®/Celeron® processor and supports two 204-pin 1333/1066 MHz dual-channel 

DDR3 SO-DIMM modules up to 16 GB. 

The integrated Intel® H61 System Chipset supports two GbE LAN ports through dual 

Realtek RTL8111E PCIe GbE controllers (with ASF 2.0 support). The KINO-DH610 also 

supports four SATA 3Gb/s drives and provides 5 V SATA power. 

The KINO-DH610 includes a VGA, DVI-D and HDMI port. Expansion and I/O include one 

PCI slot, one PCIe x1 slot, four USB 2.0 ports on the rear panel and six USB 2.0 ports by 

pin header. Serial device connectivity is provided by one external RS-232 and one internal 

RS-232/422/485 connectors. 

1.2 Connectors 

The connectors on the KINO-DH610 are shown in the figure below. 

Summary of Contents for KINO-DH610



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands