IEI Technology KINO-DH610, User Manual

Page: 52 / 162

KINO-DH610
Page 40
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
KINO-DH610 may result in permanent damage to the KINO-DH610
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the KINO-DH610. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the KINO-DH610 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the KINO-DH610, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
KINO-DH610.

Only handle the edges of the PCB : When handling the PCB, hold the PCB
by the edges.