IEI Technology KINO-DH610 User Manual Download

Page: 148 / 162

KINO-DH610

Page 136

B.4.4 Manual

To restore the last system backup, please follow the steps below.

Step 1:

Type <

> and press <

Enter

> in the main menu.

Step 2:

The Symantec Ghost window appears. Use the Ghost program to backup or

recover the system manually.

Figure B-33: Symantec Ghost Window

Step 3:

When backup or recovery is completed, press any key to reboot the system.

B.5 Other Information

B.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller

When the system uses AHCI mode or some specific SATA controllers such as ALi M5283

or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key

recovery. Please follow the steps below to install the SATA RAID/AHCI driver.

Step 1:

Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into

a USB floppy disk drive. The SATA RAID/AHCI driver must be especially

designed for the on-board SATA controller.

Step 2:

Connect the USB floppy disk drive to the system.

Summary of Contents for KINO-DH610



































































































































































Search results

Summary of Contents for KINO-DH610

Reviews:

Related manuals for KINO-DH610

Brands by name

Popular brands

IEI Technology KINO-DH610, User Manual

Search results

Summary of Contents for KINO-DH610

Reviews:

Related manuals for KINO-DH610

Brands by name

Popular brands