IEI Technology KINO-DH610 User Manual Download Page 125

Page: 125 / 162

KINO-DH610

Page 113

NOTE:

Specialized tools are required to change the partition size if the

operating system is already installed.

B.1.1 System Requirement

NOTE:

The recovery CD can only be used with IEI products. The software will

fail to run and a warning message will appear when used on non-IEI

hardware.

To create the system backup, the main storage device must be split into two partitions

(three partitions for Linux). The first partition will be for the operating system, while the

second partition will be invisible to the operating system and contain the backup made by

the one key recovery software.

The partition created for recovery images must be big enough to contain both the factory

default image and the user backup image. The size must be calculated before creating the

partitions. Please take the following table as a reference when calculating the size of the

partition.

Summary of Contents for KINO-DH610



































































































































































Search results

Summary of Contents for KINO-DH610

Reviews:

Related manuals for KINO-DH610

Brands by name

Popular brands

IEI Technology KINO-DH610, User Manual

Search results

Summary of Contents for KINO-DH610

Reviews:

Related manuals for KINO-DH610

Brands by name

Popular brands