IEI Technology iSignager-1000-Q354, User Manual

Page: 141 / 189

iSignager-1000-Q354 Digital Signage Player
Page 127
Step 5:
Install the new system fan with the system bracket with four, previously removed
retention screws.
Step 6:
Reinsert the two, previously removed retention screws to secure the system fan
to the chassis.
Step 7:
Reconnect the system fan cable connector.
Step 0:
8.4.2 HDD Replacement
HDD replacement includes the following two procedures:
Step 1:
Removing the malfunction HDD
Step 2:
Installing the replacement HDD
Step 0:
8.4.2.1 HDD Removal
To remove the HDD, please follow the steps below.
Step 1:
Power down the system.
Step 2:
Remove the cover case. See
Section 8.3.1
.
Step 3:
The HDD bracket is attached to the chassis by five retention screws (
Figure 8-7
).
Remove the five retention screws from the chassis.
Figure 8-7: HDD Bracket Retention Screws