IEI Technology iSignager-1000-Q354, User Manual

Page: 44 / 189

iSignager-1000-Q354 Digital Signage Player
Page 30
Keyboard/Mouse connectors
VGA cable connector
Parallel port connector
Serial port connectors
RJ-45 connectors
USB and PoweredUSB™ devices can be connected to the system.
The cable connection locations are shown in
Figure 2-3
.
4.3 Power-On Procedure
4.3.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the iSignager-1000-Q354 please make sure of the following:
The memory module is installed
The CF module is installed
The cover case is installed
All peripheral devices (VGA monitor, serial communications devices etc.) are
connected
The power cables are plugged in
4.3.2 Power-on Procedure
To power-on the iSignager-1000-Q354 please follow the steps below:
Step 1:
Push the power button on the front panel.
Step 2:
Once turned on, the blue power LED should be turned on. See
Figure 4-2
.
Step 0: