IEI Technology iSignager-1000-Q354 User Manual Download Page 92

Page: 92 / 189

iSignager-1000-Q354 Digital Signage Player

Page 78

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Intel® Chipset driver

Audio driver (Realtek HD Audio Driver)

VGA driver (Intel® Graphics Media Accelerator Driver)

LAN driver (Broadcom LAN Driver (for GbE LAN))

Wireless LAN driver (Atheros Wireless LAN Driver)

Installation instructions are given below.

6.2 Driver CD

All the drivers for the iSignager-1000-Q354 are on the CD that came with the system. To

install the drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system. Locate the CD drive

directory.

Step 2:

A window with a list of available drivers appears (

Figure 6-1

Figure 6-1: Available Drivers

Summary of Contents for iSignager-1000-Q354






























































































































































































Search results

Summary of Contents for iSignager-1000-Q354

Reviews:

Related manuals for iSignager-1000-Q354

Brands by name

Popular brands

IEI Technology iSignager-1000-Q354, User Manual

Search results

Summary of Contents for iSignager-1000-Q354

Reviews:

Related manuals for iSignager-1000-Q354

Brands by name

Popular brands