IEI Technology IMBA-9454B User Manual Download Page 95

Page: 95 / 192

IMBA-9454B ATX Motherboard

Page 79

System Memory

: Displays the auto-detected system memory.

Size

: Lists memory size

The System Overview field also has two user configurable fields:

System Time [xx:xx:xx]

Use the System Time option to set the system time. Manually enter the hours, minutes

and seconds.

System Date [xx/xx/xx]

Use the System Date option to set the system date. Manually enter the day, month and

year.

6.3 Advanced

Use the Advanced menu (

BIOS Menu 2

) to configure the CPU and peripheral devices

through the following sub-menus:

WARNING:

Setting the wrong values in the sections below may cause the system

to malfunction. Make sure that the settings made are compatible with

the hardware.

CPU

configuration

IDE

configuration

Floppy

configuration

Super I/O configuration

Hardware health configuration

Power

configuration

Remote

access

configuration

USB

configuration

Summary of Contents for IMBA-9454B

































































































































































































Search results

Summary of Contents for IMBA-9454B

Reviews:

Related manuals for IMBA-9454B

Brands by name

Popular brands

IEI Technology IMBA-9454B, User Manual

Search results

Summary of Contents for IMBA-9454B

Reviews:

Related manuals for IMBA-9454B

Brands by name

Popular brands