IEI Technology IMBA-9454B User Manual Download Page 34

Page: 34 / 192

IMBA-9454B ATX Motherboard

Page 18

3.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

IMBA-9454B may result in permanent damage to the IMBA-9454B and

severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the IMBA-9454B. Dry climates are especially susceptible to ESD. It is critical that

the following anti-static precautions are strictly adhered to whenever handling the

IMBA-9454B or any other electrical component.

Wear an anti-static wristband

- Wearing a simple anti-static wristband can

help to prevent ESD from damaging the IMBA-9454B.

Self-grounding

- Touch a grounded conducting material before handling and

periodically while handling the IMBA-9454B.

Use an anti-static pad -

When configuring the IMBA-9454B, place it on an

antic-static pad to reduce the possibility of ESD damage.

Only handle the edges of the IMBA-9454B -

When handling the

IMBA-9454B, hold it by its edges.

3.2 Unpacking

3.2.1 Unpacking Precautions

When the IMBA-9454B is unpacked, please do the following:

Follow the anti-static precautions outlined in

Section 3.1

Make sure the packing box is facing upwards so the IMBA-9454B does not fall

out of the box.

Make sure all the components shown in

Section 3.3

are present.

Summary of Contents for IMBA-9454B

































































































































































































Search results

Summary of Contents for IMBA-9454B

Reviews:

Related manuals for IMBA-9454B

Brands by name

Popular brands

IEI Technology IMBA-9454B, User Manual

Search results

Summary of Contents for IMBA-9454B

Reviews:

Related manuals for IMBA-9454B

Brands by name

Popular brands