IEI Technology IMBA-9454B User Manual Download Page 112

Page: 112 / 192

IMBA-9454B ATX Motherboard

Page 96

Temperature limit of OFF

Temperature limit of Start

Fan start PWM

Slope

PWM

When the

CPU FAN Mode Setting

option is in the

PWM Manual Mode

, the following

parameters can be set.

CPU Fan PWM control

Temperature Limit of OFF [000]

WARNING:

Setting this value too high may cause the fan to stop when the CPU is

at a high temperature and therefore cause the system to be damaged.

The fan will turn off when the temperature falls below this value.

Minimum Value: 0°C

Maximum Value: 127°C

CPU Temp. Limit of Start [020]

WARNING:

Setting this value too high may cause the fan to start only when the

CPU is at a high temperature and therefore cause the system to be

damaged.

If the fan is off, it will turn off when the temperature exceeds this value.

Minimum Value: 0°C

Maximum Value: 127°C

Summary of Contents for IMBA-9454B

































































































































































































Search results

Summary of Contents for IMBA-9454B

Reviews:

Related manuals for IMBA-9454B

Brands by name

Popular brands

IEI Technology IMBA-9454B, User Manual

Search results

Summary of Contents for IMBA-9454B

Reviews:

Related manuals for IMBA-9454B

Brands by name

Popular brands