IEI Technology IMBA-9454B User Manual Download Page 117

Page: 117 / 192

IMBA-9454B ATX Motherboard

Page 101

Power Off

The system remains off.

Power On

The system turns on.

Last State

EFAULT

The system returns to the state just before power loss

Resume on Ring [Enabled]

Use the

Resume on Ring

BIOS option to enable activity on the RI (ring in) modem line to

rouse the system from a suspend or standby state. That is, the system will be roused by

an incoming call on a modem.

Disabled

Wake event not generated by an incoming call

Enabled D

EFAULT

Wake event generated by an incoming call

Resume on PME# [Enabled]

The

Resume on PME#

BIOS option specifies if the system is roused from a suspended or

standby state when the "magic packet" is received over the LAN.

Disabled

Not woken by network activity

Enabled D

EFAULT

Woken by magic packet sent on LAN

Resume on PCI-Express WAKE# [Enabled]

The

Resume on PCI-Express WAKE#

BIOS option specifies if the system is roused from

a suspended or standby state when there is activity on the PCI-Express bus.

Disabled

Wake event not generated by PCI-Express activity

Enabled D

EFAULT

Wake event generated by PCI-Express activity

Resume On RTC Alarm [Disabled]

Use the

Resume On RTC Alarm

option to specify the time the system should be roused

from a suspended state.

Summary of Contents for IMBA-9454B

































































































































































































Search results

Summary of Contents for IMBA-9454B

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454B, User Manual

Search results

Summary of Contents for IMBA-9454B

Reviews:

Brands by name

Popular brands