IEI Technology IMBA-9454B User Manual Download Page 100

Page: 100 / 192

IMBA-9454B ATX Motherboard

Page 84

6.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

BIOS Menu 5: IDE Master and IDE Slave Configuration

Auto-Detected Drive Parameters

The “grayed-out” items in the left frame are IDE disk drive parameters automatically

detected from the firmware of the selected IDE disk drive. The drive parameters are listed

as follows:

Device

: Lists the device type (e.g. hard disk, CD-ROM etc.)

Type

: Indicates the type of devices a user can manually select

LBA Mode

: Indicates whether the LBA (Logical Block Addressing) is a

method of addressing data on a disk drive is supported or not.

Block Mode

: Block mode boosts IDE drive performance by increasing the

amount of data transferred. Only 512 bytes of data can be transferred per

Summary of Contents for IMBA-9454B

































































































































































































Search results

Summary of Contents for IMBA-9454B

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454B, User Manual

Search results

Summary of Contents for IMBA-9454B

Reviews:

Brands by name

Popular brands