background image

 

IEM-LX-800 ETX CPU Module

 NOTE: 

Not all RealTek Sound Effect Managers have all the above listed options. 

The Sound Effect Manager loaded onto the system may only have some of 

the options listed above. 

Below is a brief description of the available configuration options in the 

Sound Effects 

Manager

.  

 

Sound Effect

:- Select a sound effect from the 23 listed options in the drop 

down menu. Selected sound effect properties can be edited. To edit the sound 

effect click “

E

DIT

.” 

 

Karaoke Mode

:- The 

Karaoke Mode

 is accessed in the Sound Effect window. 

The 

Voice Cancellation

 disables the vocal part of the music being played. 

The 

Key adjustment

 up or down arrow icons enables users to define a key 

that fits a certain vocal range. 

 

 

Equalizer Selection

:- Preset equalizer settings enable easy audio range 

settings. Ten frequency bands can be configured. 

 

 

Speaker Configuration

:- Multi-channel speaker settings are configured in 

this menu. Configurable options include: 

Headphone 

Channel mode for stereo speaker output 

Channel mode for 4 speaker output 

Channel mode for 5.1 speaker output 

Synchronize the phonejack switch with speakers settings   

 

 

Speaker Test:- 

Each speaker connected to the system is tested individually 

to see if the 4-channel or 6-channel audio operates properly. 

 

 

S/PDIF-In & S/PDIF-Out

:- These functions are currently not supported. 

 

 

Page 134 

Summary of Contents for IEM-LX













































































































































Reviews: