manualshive.com logo in svg

IEI Technology IEM-LX, User Manual, Page: 57 / 140

Share
Download
IEI Technology IEM-LX User Manual Download Page 57

 

IEM-LX-800 ETX CPU Module

 

F1 

General help, only for Status Page Setup Menu and Option 

Page Setup Menu 

F2 Item 

help 

F5 

Previous values for the page menu items 

F6 

Fail-safe defaults for the current page menu items 

F7 

Optimized defaults for the current page menu items 

F9 

Menu in BIOS 

F10 

Save changes and Exit BIOS 

Table 6-1: BIOS Navigation Keys 

6.1.3 Getting Help 

When F1 is pressed a small help window describing the appropriate keys to use and the 

possible selections for the highlighted item appears. To exit the Help Window press E

SC

 or 

the F1 key again. 

6.1.4 Unable to Reboot After Configuration Changes 

If the system cannot be booted after changes are made, restore the CMOS defaults. The 

baseboard should come with a restore CMOS settings jumper. Refer to the documentation 

that came with the baseboard for more information. 

6.1.5 Main BIOS Menu   

Once the BIOS opens, the main menu in 

BIOS Menu 1

 appears. 

 

Page 57

Summary of Contents for IEM-LX













































































































































Reviews:

No comments