IEI Technology IEM-LX, User Manual

Page: 63 / 140

IEM-LX-800 ETX CPU Module
IDE HDD Auto-Detection [Press Enter]
Use the IDE HDD Auto-Detection option to enable BIOS to automatically detect the IDE
settings. Select IDE HDD Auto-Detection and press “ E
NTER
. ” BIOS automatically detects
the HDD type. Do not set this option manually.
IDE Channel 0/1 Master/Slave [Auto]
Use the IDE Channel option to activate or deactivate the following drive channels:
Channel 0 Master
Channel 0 Slave
Channel 1 Master
Channel 0 Slave
None If no drives are connected to the IDE channel select this
option. Once set, this IDE channel becomes
inaccessible and any drives attached to it undetected.
Auto (Default) Setting this option allows the device to be automatically
detected by the BIOS
Manual Selecting this option allows manual configuration of the
device on the IDE channel in BIOS.
Access Mode [Auto]
Use the Access Mode option to determine the hard disk BIOS translation modes. Most
systems now use hard drives with large capacities and therefore either the LBA translation
mode or auto should be selected.
CHS Select this mode if the HDD capacity is less than
504MB.
LBA Select this mode if the HDD capacity is more than
8.4GB.
Page 63