manualshive.com logo in svg

IEI Technology IEM-LX, User Manual, Page: 80 / 140

Share
Download
IEI Technology IEM-LX User Manual Download Page 80

 

IEM-LX-800 ETX CPU Module

3.3MBps 

 

Mode 1 

 

PIO mode 1 selected with a maximum transfer rate of 

5.2MBps 

 

Mode 2 

 

PIO mode 2 selected with a maximum transfer rate of 

8.3MBps 

 

Mode 3 

 

PIO mode 3 selected with a maximum transfer rate of 

11.1MBps 

 

Mode 4 

 

PIO mode 4 selected with a maximum transfer rate of 

16.6MBps 

 

IDE UDMA [Auto]   

Use the 

IDE UDMA

 option to select the Ultra DMA (UDMA) mode for the following HDDs. 

 

IDE Primary Master UDMA 

 

IDE Primary Slave UDMA 

 

 

Auto 

(Default) 

The computer selects the correct UDMA. 

 

Disabled 

 

The UDMA for the HDD device is disabled. 

 

IDE DMA transfer access [Enabled] 

Use the 

IDE DMA transfer access

 option to enable or disable DMA support for IDE 

devices connected to the system. 

 

Disabled 

 

All IDE drive DMA transfers are disabled. The IDE drives 

use PIO mode transfers. 

 

Enabled 

(Default)

All IDE drive DMA transfers are enabled. 

 
 

 

Page 80 

Summary of Contents for IEM-LX













































































































































Reviews:

No comments