IEI Technology IEM-LX Page 72 User Manual Download

Page: 72 / 140

IEM-LX-800 ETX CPU Module

RAM.

Delay for HDD (secs) [3]

Use the

Delay for HDD

option to specify the period of time the system should wait before

the HDD is identified. If selected, the user is asked to enter a number between 0 and 15.

The number specified is the number of seconds the system waits before the HDD is

identified.

Small Logo (EPA) Show [Disabled]

Use the

Small Logo (EPA) Show

option to specify if the Environmental Protection

Agency (EPA) logo appears during the system boot-up process. If enabled, the boot up

process may be delayed.

Disabled

(Default)

EPA logo does not appear during boot up.

Enabled

EPA logo appears during boot up.

Cyrix 6x86/MII CPUID [Enabled]

Use the

Cyrix 6x86/MII CPUID

option to determine if the system checks to see if a Cyrix

CPU is installed.

Disabled

(Default)

The system doesn’t look for a Cyrix CPU

Enabled

The system looks for a Cyrix CPU

6.4 Advanced Chipset Features

Use the

Advanced Chipset Features

menu (

BIOS Menu 5

) to change chipset

configuration options.

Page 72

Summary of Contents for IEM-LX













































































































































Search results

Summary of Contents for IEM-LX

Reviews:

Related manuals for IEM-LX

Brands by name

Popular brands

IEI Technology IEM-LX, User Manual

Search results

Summary of Contents for IEM-LX

Reviews:

Related manuals for IEM-LX

Brands by name

Popular brands