IEI Technology IEM-LX Page 67 User Manual Download

Page: 67 / 140

IEM-LX-800 ETX CPU Module

Disabled

Normal POST occurs after the computer is turned on

Enabled

(Default)

Quick POST occurs after the computer is turned on

Boot From LAN Control [Disabled]

Use the

BOOT From LAN Control

option to enable the system to be booted from a

remote system.

Disabled

(Default)

The system cannot be booted from a remote system

through the LAN

Enabled

The system can be booted from a remote system

through the LAN

Boot Device

Use the

Boot Device

options to select the order of the devices the system boots from.

There are three Boot Device configuration options. They are:

First Boot Device

EFAULT

: HDD-0]

Second Boot Device

EFAULT

: CDROM]

Third Boot Device

EFAULT

: SCSI]

Using the default values, the system first looks for a HDD to boot from. If it cannot find an

HDD it uses a CD-ROM to boot from. If both The HDD and the CD-ROM are unavailable,

the system boots from a SCSI drive.

Boot Device configuration options are:

Floppy

LS120

HDD-0

SCSI

CDROM

HDD-1

Page 67

Summary of Contents for IEM-LX













































































































































Search results

Summary of Contents for IEM-LX

Reviews:

Related manuals for IEM-LX

Brands by name

Popular brands

IEI Technology IEM-LX, User Manual

Search results

Summary of Contents for IEM-LX

Reviews:

Related manuals for IEM-LX

Brands by name

Popular brands