IEI Technology AFL4-W10-EHL, User Manual

Page: 125 / 135

AFL4-W10/W12/12/W13-EHL Panel PC
Page 124
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the AFL4-W10/W12/12/W13-EHL.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
▪ Follow the electrostatic precautions outlined below whenever the device is
opened.
▪ Make sure the power is turned off and the power cord is disconnected
whenever the AFL4-W10/W12/12/W13-EHL is being installed, moved or
modified.
▪ To prevent the risk of electric shock, make sure power cord is
unplugged from wall socket. To fully disengage the power to the unit,
please disconnect the power cord from the AC outlet. Refer servicing to
qualified service personnel. The AC outlet shall be readily available and
accessible.
▪ Do not apply voltage levels that exceed the specified voltage range .
Doing so may cause fire and/or an electrical shock. Use a power cord that
matches the voltage of the power outlet, which has been approved and
complies with the safety standard of your particular country.
▪ Electric shocks can occur if the AFL4-W10/W12/12/W13-EHL chassis is
opened when it is running. To avoid risk of electric shock, this device must
only be connected to a supply mains with protective earth.
▪ Do not drop or insert any objects into the ventilation openings of the
AFL4-W10/W12/12/W13-EHL.