IEI Technology AFL4-W10-EHL, User Manual

Page: 38 / 135

AFL4-W10/W12/12/W13-EHL Panel PC
Page 37
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them ( Figure 3-7 ).
Figure 3-7: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the
four screw holes on the real panel of the panel PC and tighten until the screw
shank is secured against the rear panel ( Figure 3-8 ).
WARNING:
Please use the M4 screws provided in the wall mount kit for the rear panel.
If the screw is missing, the thread depth of the replacement screw should
be not more than 4 mm.