IEI Technology AFL4-W10-EHL User Manual Download

Page: 64 / 135

AFL4-W10/W12/12/W13-EHL Panel PC

Page 63

BIOS Menu 5: CPU Configuration (2/3)

BIOS Menu 6: CPU Configuration (3/3)

➔

Intel (VMX) Virtualization Technology [Enabled]

Use the

Intel (VMX) Virtualization Technology

option to enable or disable virtualization

on the system. When combined with third party software, Intel® Virtualization technology

allows several OSs to run on the same system at the same time.

➔

Disabled

Disables Intel Virtualization Technology.

➔

Enabled

EFAULT

Enables Intel Virtualization Technology.

➔

Active Processor Cores [All]

Use the

Active Processor Cores

BIOS option to enable numbers of cores in the

processor package.

➔

All

EFAULT

Enable all cores in the processor package.

➔

Enable one core in the processor package.

➔

Enable two cores in the processor package.

Summary of Contents for AFL4-W10-EHL








































































































































Search results

Summary of Contents for AFL4-W10-EHL

Reviews:

Related manuals for AFL4-W10-EHL

Brands by name

Popular brands

IEI Technology AFL4-W10-EHL, User Manual

Search results

Summary of Contents for AFL4-W10-EHL

Reviews:

Related manuals for AFL4-W10-EHL

Brands by name

Popular brands