IEI Technology AFL4-W10-EHL, User Manual

Page: 126 / 135

AFL4-W10/W12/12/W13-EHL Panel PC
Page 125
▪ If considerable amounts of dust, water, or fluids enter the device , turn off
the power supply immediately, unplug the power cord, and contact the
AFL4-W10/W12/12/W13-EHL vendor.
▪ RTC battery safety precautions:
o
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE
o
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion
o
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas
o
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas
▪ DO NOT :
o
Drop the device against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
o
Touch any of the LCD panels with a sharp object
o
In a site where the ambient temperature exceeds the rated temperature
B.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
AFL4-W10/W12/12/W13-EHL may result in permanent damage to the
AFL4-W10/W12/12/W13-EHL and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL4-W10/W12/12/W13-EHL. Dry climates are especially susceptible to
ESD. It is therefore critical that whenever the AFL4-W10/W12/12/W13-EHL is opened and
any of the electrical components are handled, the following anti-static precautions are
strictly adhered to.