manualshive.com logo in svg

IEI Technology A200C-800Z-R10, User Manual, Page: 32 / 177

Share
Download
IEI Technology A200C-800Z-R10 User Manual Download Page 32

 

 

1

-32

CKY-6614 WSB- Card 

32

 

 

IEI

®

 Technology, Corp

.

 

2.10  Real Time Clock 

256-byte battery backed CMOS RAM 

2.11 System Monitoring 

The A200 motherboard is capable of self-monitoring various aspects of its operating 

status including: 

 

CPU, chipset, and battery voltage, +3.3V, +5V, and +12V 

 

RPM of cooling fans 

 

CPU and board temperatures (by the corresponding embedded sensors) 

 

2.12  Infrared Data Association (IrDA) Interface 

The A200 Motherboard IrDA supports the following interfaces. 

 

Serial Infrared (SIR) 

 

Shift Keyed Infrared (ASKIR) 

If you want to use the IrDA port, you have to configure SIR or ASKIR mode in the BIOS 

under 

Super IO devices

. Then the normal RS-232 COM 2 will be disabled. 

2.13 USB Interfaces 

The A200 Motherboard has six USB interfaces, two internal and four external. The USB 

interfaces support USB2.0.

Chapter 1

 

2.14 BIOS 

The A200 Motherboard uses a licensed copy of AMI BIOS. The features of the flash BIOS 

used are listed below: 

 

SMIBIOS (DMI) compliant 

 

Console redirection function support 

 

PXE (

P

re-Boot E

x

ecution 

E

nvironment ) support 

 

USB booting support 

 

Summary of Contents for A200C-800Z-R10


















































































































































































Reviews:

No comments