manualshive.com logo in svg

IEI Technology A200C-800Z-R10, User Manual, Page: 160 / 177

Share
Download
IEI Technology A200C-800Z-R10 User Manual Download Page 160

 

 

1

-16

0

CKY-6614 WSB- Card 

160

 

 

IEI

®

 Technology, Corp

.

 

The audio kit comes with a PCI slot bracket for the installation into a PC case or 

rackmount chassis.    Connect the 10-pin header to the PCIE-9450’s AUDIO1 header as 

shown in Figure E-1, and if necessary, connect the CDIN1 and AUXIN1 to optical drives or 

other audio sources, e.g., an MPEG card, using a 4-pin cable.    Note that depending on 

the devices you connect to, the phone jacks have different functions with different audio 

installation modes (2 channel or 5.1 channel modes).     

D.3 Driver 

Installation 

The driver installation has been described in Chapter 6, Section 6.3. 

After reboot, you should be able to find the sound effect configuration utility in Windows 

Control Panel (see 

Figure D-3

); and if peripheral speakers have been properly connected, 

hear the sound effects.     

 

Figure D-3: Sound Effect Manager Icon 

 
 
 

Summary of Contents for A200C-800Z-R10


















































































































































































Reviews:

No comments