IEI Technology A200C-800Z-R10 User Manual Download Page 2

Page: 2 / 177

-2

CKY-6614 WSB- Card

IEI

Technology, Corp

REVISION HISTORY

Title

A200C-800Z-R10 zero cache 800MHz Celeron M

Motherboard

Revision Number

Description

Date of Issue

1.0

Initial release

May 2006

COPYRIGHT NOTICE

The information in this document is subject to change without prior notice in order to

improve reliability, design and function and does not represent a commitment on the part

of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

TRADEMARKS

IBM PC is a registered trademark of International Business Machines Corporation. INTEL

is a registered trademark of INTEL Corporation. AMI is registered trademarks of American

Megatrends Inc. Other product names mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of their respective

owners.

Summary of Contents for A200C-800Z-R10


















































































































































































Search results

Summary of Contents for A200C-800Z-R10

Reviews:

IEI Technology A200C-800Z-R10, User Manual, Page: 2 / 177

Search results

Summary of Contents for A200C-800Z-R10

Reviews: