IEI Technology A200C-800Z-R10 User Manual Download Page 167

Page: 167 / 177

-16

A200C-800Z-R10 Motherboard

167

The audio configuration window in

Figure D-11

allows you to test each connected

speaker to see if your 4-channel or 6-channel audio operates properly. If any speaker

malfunctions, you should then check the cabling or replace the malfunctioning parts.

Select each specific speaker to test its functionality. The speaker you select will be

highlighted and sound should be generated.

NOTE:

1. The test scenario that appears in the

Speaker Test

window

corresponds to the number of speakers you selected in the

Sound

Effect

window.

2. You should select and deselect the

Swap Center/Subwoofer Output

check box to see if these two devices properly work.

D.11 S/PDIF-In & S/PDIF-Out

These functions are currently not supported.

D.12 Connector Sensing

Summary of Contents for A200C-800Z-R10


















































































































































































Search results

Summary of Contents for A200C-800Z-R10

Reviews:

IEI Technology A200C-800Z-R10, User Manual, Page: 167 / 177

Search results

Summary of Contents for A200C-800Z-R10

Reviews: