IEI Technology A200C-800Z-R10 User Manual Download Page 16

Page: 16 / 177

-16

CKY-6614 WSB- Card

IEI

Technology, Corp

1.1 A200 Motherboard Overview

The Mini ITX form factor

A200C-800Z-R10 (

A200) 800MHz Celeron M single board

computer is fully equipped with a high performance processor and advanced multi-mode

I/Os. The A200 is designed for system manufacturers, integrators, and VARs that want

performance, reliability, and quality at a reasonable price.

1.1.1 A200 Motherboard Benefits

Some of the A200 motherboard benefits include,

providing access to multiple PCI and ISA expansion slots for easy system

expansion

operating reliably in harsh industrial environments with ambient temperatures

as high as 60°C

rebooting automatically if the BIOS watchdog timer detects that the system is

no longer operating

1.1.2 A200 Motherboard Features

Some of the A200 motherboard features are listed below:

Complies with Mini ITX

Complies with RoHS

Comes with preinstalled ultra low voltage (ULV) 800MHz zero cache Celeron

M CPU

Supports a maximum front side bus (FSB) speed up to 400MHz

Supports up to 2GB of 266MHz dual channel DDR memory

Comes with dual high performance gigabit Ethernet (GbE) controllers

Supports six USB 2.0 connectors

Supports one mini-PCI device

Supports one PCMCIA device

Supports one compact flash (CF) device

Summary of Contents for A200C-800Z-R10


















































































































































































Search results

Summary of Contents for A200C-800Z-R10

Reviews:

IEI Technology A200C-800Z-R10, User Manual, Page: 16 / 177

Search results

Summary of Contents for A200C-800Z-R10

Reviews: