20030516
User’s Manual
8
STAR FINGER007
3. PRODUCT OVERVIEW
3.1 FUNCTIONS
Stand-Alone Operation
The
STAR FINGER007(STAR FINGER007SR)
is capable of having two readers(entry and exit). The
unit receives card data signals from the RF readers and determines whether or not to unlock the door.
When an input signal is sent, for example from and activated sensor or if the exit button pressed, the
controller generates and logs an appropriate response. All events are kept in its own memory and sent
to the host computer. The access controller is a true standalone device that in the event of a
malfunction, will not affect other units, even if used in conjunction with one another.
Operation with Host Computer
All event transactions can be managed via the host computer. The data transmitted from the controller
can be displayed and stored on the host PC.
Data Backup
The controller retains all user information and event data for 30 days, even in the event of power failure.
CAUTION : Battery S/W must be set correctly before the unit running.
(See the INSTALLATION section)
Keypad
If the STAR FINGER007 is not connected to host PC, the integrated keypad and LCD display module
can also be used for the entire programming process manually.
Anti-Pass-Back
Using an additional proximity reader foe exiting, the Anti-Pass-Back mode can be set. Anti-Pass-Back
mode prevents any entry or exit when the registered user did not properly followed one entry and one
exit by the Anti-Pass-Back rule. APB only allowed exit for the user once got into the door first and it
doesn’t allow any user trying twice entry or twice exit
Input/Output
The STAR FINGER007 has
built-in 4 inputs and 4 outputs (2 relay outputs and 2 TTL outputs) which can
be used to manipulate a wide variety of controls.
Time Schedule Setup
You can program 10 time schedules and apply one time schedule to each user. Each time schedule has
8 different time zones from Monday to Sunday(7 time zones) and one holiday. Each time zone has 5
different time codes so you can program 5 different time codes to each day. Also you can program time
schedule for individual inputs and outputs. Note that the time schedule for input is activated time code
for input device so that the input is activated during the time code on this time schedule. Each time
schedule is linked to one of holiday schedule and this linked holiday only validates to holiday time code
