20030516
User’s Manual
9
STAR FINGER007
of the time schedule.
Holiday Schedule Setup
Excepting Sunday, you can program 32 holidays to one holiday schedule. Each holiday schedule is
linked to one time schedule which has time code for holidays. So you can program all holidays to
holiday schedule and the time code for holidays is programmed to holiday time zone of time schedule.
Example : A : Holiday schedule 01 linked to time schedule 01,
Holiday schedule 02 linked to time schedule 02.
B : Holiday schedule 02 linked to time schedule 01,
Holiday schedule 01 linked to time schedule 02.
Forced Door Open and Door Open Alarm
When door is opened by force, Door Contact Output is generated. And, when the door is being opened
by normal operation, after 20 sec. door-open alarm(blink buzzer) will be generated until the door is
closed.
Duress Alarm
You can select Duress Mode enable or disable. If you select Duress Mode enable, in case of Duress,
enter the 2 digit Duress Password and press <
ENT
> and open the door using general process. If you
registered ID, then Duress Output will be generated, and alarm event will be sent to the host PC.
1:N Certification (IDENTIFICATION)
You can certify using the fingerprint alone without RF card or PIN. You can set this function through the
<TYPE SELECTION> in SETUP MENU F1. In the IDENTIFICATION MODE, the security level gets
higher automatically, FRR(False Rejection Ratio) as well, but FAR(False Accept Ratio) gets lower,
which may result in a lower recognition ratio.
When using this mode, you have to press the
<ENT>
key first, then the fingerprint scanner waits for a
fingerprint to be scanned. When a fingerprint-scanning is completed,
FINGER007
compares the data
and makes corresponding outputs.
* CAUTION : The number of registrants must be 50 or less.
